How To Change Battery Samsung Tab 3 7.0

Introduction

Nosotros will supersede the bombardment in this guide. Make sure to come across the department on the disassembly of the white backing and silver siding before yous begin to repair.

Video Overview

To begin working on your repair, turn your device over and open the micro SD slot, as shown in the first picture.

To begin working on your repair, turn your device over and open up the micro SD slot, as shown in the first picture.
Using the apartment part of the spudger, brainstorm pushing it between the white bankroll and the SD slot. Go on to pry off the white bankroll until you hear several clicks and see the white backing elevator upward, as shown in the second picture.
Continue to pry off the white backing effectually the device, as shown in the third picture show.

Once the backing has been pried off all around the device, remove the white backing.

Once the bankroll has been pried off all around the device, remove the white backing.

To remove the silverish siding, begin by pushing the spudger between the frame and the screen, every bit shown in the first picture show.
Do this until you run into the silver siding begin to lift up. Continue doing this around the edges of the device, as shown in the 2nd motion-picture show.
Once you silverish siding is loose all effectually the device, remove it advisedly with your manus as shown in the third pic.

Begin by removing the four designated 1.33x2.00 mm Phillips screws with the screwdriver, equally shown in the beginning picture.
Once the screws are removed, apply a pair of tweezers or the spudger to remove the battery connector.
Pull the battery connector upward as shown in the second picture.
Once the battery connector is removed, yous can remove the battery using the spudger as shown in the third picture.